RS-5 COMMERCIAL Technical Specs

12 Volt RS-5 Commercial System (Two Channel)

12Volt – Extra Heavy Duty Equipment

 

Input Voltage : 12 Volt DC  (Max 16Volts DC)
Current Drawn under DRY Conditions :          < 0.009A
Current Drawn under WET Conditions : < 0.135A
Current Drawn under Battery Low : < 0.008A
Ground : (-) Negative
Housing : High Grade ABS Plastic
Weight Complete : Approx. 1.195 Kgs
Number of Anodes 6 – Extra Heavy Duty
Output Voltage : (+) 40 – 49 Volts

 

 

24 Volt RS-5 Commercial System (Two Channel)

24Volt – Extra Heavy Duty Equipment

 

Input Voltage : 24 Volt DC (Max 32Volts DC)
Current Drawn under DRY Conditions :          < 0.012A
Current Drawn under WET Conditions : < 0.175A
Current Drawn under Battery Low : < 0.008A
Ground : (-) Negative
Housing : High Grade ABS Plastic
Weight Complete : Approx. 1.220 Kgs
Number of Anodes 6 – Extra Heavy Duty
Output Voltage : (+) 40 – 49 Volts

 

 

RUSTSTOP® ELECTRONIC UNIT – WIRE SPECIFICATIONS

The cable supplied with each unit is generally more than sufficient, however for some larger vehicles some additional wire may occasionally be needed.  If so please ensure that it is of the same specification supplied (as below):

 

Multi Strand Panel Flex wire

Size: 0.50mm²   (0.75mm² can also be used)

Voltage Rating 500V

Nominal Current Rating 3A min

Strand No x Diameter: 14 x 0.21

Temp.range =  –10 to +80 degrees C

Insulation: Flexible grade PVC

Flexibility class 4&5

Conductor type:  High Conductivity annealed copper

 

In highly corrosive environment, and extreme temperature condition, (extreme conditions), we would suggest the use of corrosive resistant 0.75mm² Silicon wiring for the anodes.